Servo Motor with Positioning and Foot Lift
TNS 800 serie Servo Motor is designed to meet almost all basic light duty requirements of various commercial sewing machines, including lockstitch sewing machines, overlock sewing machines and interlock sewing machines. It utilizes extremely powerful rare-earth Neodymium permanent magnets.
The motor produces almost no noise, saves energy (60-80%) and is brushless, speed djustable and durable. It provides a high starting torque even at low speed or from a complete stop. By using a modern technologically advanced microprocessor,Hall sensor and Pulse-Width Modulation technology,the TNS800 series motor can be set to rotate at different maximum speeds, in either normal or reverse directions, and can start with different accelerating speeds. It will stop automatically with any interruption such as in-line voltage, electrical surge, radio frequency interference or overloading. It is fully protectedted by the software and will give error messages indicating which problem is encountered. It even works well in environments with an unstable electrical power supply.
TNS800 series has super high start torque up to 4Nm.
TNS800-2P has Needle positioning function and Foot lift control output
Features & Settings:
1.Motor rotating direction setting
2.Slow starting speed
3.Maximum speed setting
4.Needle positioning setting
1.Instruction manual / parts list
3.Pulley cover (belt guard)
5.Push-button on/off wire harness
6.Needle Positioning kit
7.Foot Lift control output
1.220V Singe Phase
3.Variable Speed to 3800 RPM
4.Power: Up to 1200W
5.Start torque output up to 4Nm
All kinds of lockstitch sewing machines, overlock sewing machines and interlock sewing machines.
Heavy duty sewing machines which need high start torque, like carpet over edging sewing machines, Roller feed sewing machines, bartack sewing machines, etc.